E-100BTX-HT Series

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential.

Specifications
Data Rate: 100 Mbps

Switch:
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: LPT On/Off
SW4: FEF On/Off

Jumper: Block 1: Auto-MDI/MDIX enable

Status LEDs:
PWR (Power): Lit for normal operation
SDF (Signal Detect Fiber): Lit for fiber link
SDC (Signal Detect Copper): Lit for copper link
RXF (Receive Fiber): Flashing = RX data
RXC (Receive Copper): Flashing = RX data

Dimensions:
Width: 3″ [76 mm]
Depth: 4.7” [119 mm]
Height: 1″ [25 mm]

Power Supply:
External AC/DC required; Output: 9 VDC. 1.0A;
120-240VAC input, unregulated; standard

Environment:
Operating: -25°C to 65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 2 lbs. [0.90 kg]

MTBF:
Greater than 46,768 hours (MIL-HDBK-217F)
Greater than 123,861 hours (Bellcore7 V5.0)