Xpress DR+

DIN-rail mount form factor serial to Ethernet industrial device server

Specifications
Serial Interface:
2 RJ45 RS-232 Serial Ports
Baud rate selectable from 300 to 230 Kbps
1 screw terminal RS-422/485 interface on Serial Port 2 (2 and 4-wire support)
LED indicators for TXD and RXD activities

Network Interface:
2 RJ45 10Base-T/100Base-TX Ethernet ports
Embedded, unmanaged, fully compliant 802.3u non-blocking Ethernet switch
Store and forward architecture with 1K MAC address lookup table
Automatic MDI/MDI-X crossover
Full duplex IEEE 802.3x flow control
Half duplex back pressure flow control
IEEE 802.1d spanning tree

LED Indicators:
TX/RX activity per serial
Link/Activity per Ethernet port
Power/System OK

Power Input:
Removable screw terminal block connector
9-30 VDC or 9-24 VAC with chassis ground
2.3 Watts maximum

Environmental (Operating):
Temperature: -40°C to +70°C (-40 to 158°F)
Humidity: 20% to 90% relative humidity, noncondensing

Flash Memory: 2 MB Flash

EEPROM: 2 KB

Reset: Front panel recessed push button

Dimensions (L x W x H): 8.76 x 5.7 x 12.31 cm (3.45 x 2.25 x 4.85 in), terminal blocks included
Weight: 0.21 kg (0.46 lb)