1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender – POE-E202

PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.

Specifications
Interfaces:
PoE IN: 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE “Data + DC power” in
auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT: 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE “Data + DC power” out
auto MDI/MDI-X, auto-negotiation RJ45 connector

PoE Standard:
“PoE In” Port
IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per “PoE Out” Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE

PoE Power Supply Type: End-span (Type A)

PoE Power:
“PoE In” Port
52~56V DC, max. 30.8 watts
Per “PoE Out” Port
44~55V DC, max. 25 watts

Power Pin Assignment:
“PoE In” Port
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per “PoE Out” Port
1/2 (+), 3/6 (-)

Data Rate: 10/100/1000Mbps

MAC Address Table: 2K

Data Buffer: 2Mbits

Switch Architecture: Store-and-Forward

Switch Fabric: 6Gbps

Switch Throughput: 4.46Mpps @ 64 bytes

Jumbo Frame: 10KB

Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

LED Indicators:
“PoE In” Port: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)
“PoE Out” Port 1: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)
“PoE Out” Port 2: PoE-in-Use x 1 (amber), LNK/ACT x 1 (green)

Protection:
ESD (Ethernet): 2KV (TBD)
Surge (EFT for power): 2KV (TBD)

Enclosure: Metal

Installation: Wall mountable

Dimensions (W x D x H): 140 x 77 x 28 mm

Weight: 258g

Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC

Power Consumption:
1.6 watts/5.5BTU (System on with PoE input)
2.2 watts/7.5BTU (Ethernet full loading without PoE function)
36 watts/122.8BTU (Full loading with PoE function)

Network Cable:
10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)

Operating:
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage:
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)