S4110-4848

The S4110 is a stand-alone fiber to fiber media converter. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ slots. This allows network managers to customize the S4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ ports support a wide variety of Transition Networks 10GE SFP+ fiber modules. This any-rate to same-rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications.

Specifications
Ports:
PWR: On = Power
Port 1 Link/Act: On = Link, Flashing = Network Traffic
Port 2 Link/Act: On = Link, Flashing = Network Traffic

Data Rate: Protocol Independent, 1 Gbps to 11.5 Gbps

Dip Switch: Only 4 of the 8 Dip Switches are used to select the operational data rate, see the user guide for the supported dip switch configurations

Dimensions:
Width: 3.25” [82 mm]
Depth: 6.5” [165 mm]
Height: 1″ [25 mm]

Power Consumption: 4.2W (350mA @12V)

Power Supply: External AC/DC power supply, Universal AC 120-240VAC input, 12VDC 1.5A output

Environment:
Operating: 0°C to 50°C
Storage: -40° to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 2 lbs. [0.90 kg]

MTBF:
With Power Supply:
Greater than 41,660 hours (MIL-HDBK-217F)
Greater than 114,580 hours (Bellcore)
Without Power Supply:
Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 687,000 hours (Bellcore)