1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender – POE-E304

PLANET POE-E304 is a 1-port 95W 802.3bt PoE++ to 4-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE applications. The POE-E304 can obtain a maximum of 95-watt PoE power from IEEE 802.3bt PoE input port and supplies a maximum of 65-watt PoE power budget to four PoE output ports, extending the simultaneous transmission distance of both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to 200 meters. Thus, the POE-E304 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Specifications
Network Connector:
PoE In Port
1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE++ “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/802.3at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector

Data Rate: 10/100/1000Mbps

Switch Architecture: Store-and-Forward

MAC Address Table: 2K

Data Buffer: 1Mbits

Switch Fabric: 10Gbps

Switch Throughput: 7.44Mpps @ 64 bytes

Jumbo Frame: 9K

Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

LED Indicators:
PoE In Port
10/100/1000 LNK/ACT (Green)
PoE Out Port 1 to Port 4
10/100/1000 LNK/ACT (Green)
PoE-in-Use (Orange)
PWR (Orange)

Protection:
ESD: Contact 4KV, Air 6KV
Surge: 4KV

Enclosure: Metal

Installation: Desktop / Wall mountable

Dimensions (W x D x H): 168 x 93 x 32 mm

Weight: 403g

Power Requirements:
PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC
External DC: 50~56V DC

Power Consumption:
0.9 watts/3.1BTU (System on)
74 watts/252.4BTU (Full loading with PoE function)

Network Cable:
10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e, 6, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m, 328ft)

PoE Standard:
PoE In Port
IEEE 802.3bt Power over Ethernet Plus Plus end-span and mid-span PD class 4 PD
Per PoE Out Port
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE

PoE Power:
PoE In Port
50~56V DC, max. 95 watts input
Per PoE Out Port
50~55V DC, max. 32 watts output

Power Pin Assignment:
PoE In Port
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
Per PoE Out Port
1/2 (-), 3/6 (+), end-span (Type A)

PoE Power Budget:
65 watts (max.) @ IEEE 802.3bt PoE++ Type 4 PSE input
32 watts (max.) @ IEEE 802.3at PoE+ input

Operating:
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage:
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)