1080p HD Low Bandwidth H.264/H.265 AV over IP Encoder – NHD-110-TX

The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-TX provides a low bandwidth yet incredibly high quality video stream allowing you to easily accomplish large scale AV deployments. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

Specifications
AUDIO & VIDEO
Inputs:
TX: 1x HDMI 19-pin HDMI type A
RX: 1x 8-pin RJ-45 female | 10/100Base-T

Outputs:
TX: 1x 3-pin Phoenix Analog Audio (de-embed from HDMI input)
RX:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.

Video Encoding:
Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

End to End Latency:
High Quality Mode: ~250ms
Low Latency Mode: ~80ms

Audio Formats: LPCM/MPEG4 AAC stereo, 48KHz

Video Resolution (Max):
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

Maximum Pixel Clock: 150Mhz

AUDIO & VIDEO
Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

COMMUNICATION & CONTROL
HDMI: HDCP 1.4 | EDID

RS-232: 1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN: 1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

IR:
1x IR TX: 3.5mm TS Jack Socket
IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices

USB:
TX:
1 x Type B Host
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)
RX:
2 x Type A Device Ports
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

POWER
Power Supply: PoE | 12V 1A DC

Max Power Consumption: 6W (DC adapter)