4-Input 4K60 DSC HDBaseT Switcher with USB – SW-740-TX

Utilizing the best in HDBaseT technology, the SW-740-TX harnesses the power of the Class C specification to deliver 5-play functionality over 100m/328ft of Cat6 cable. 4K/UHD video, Ethernet, Control & Power (PoH) can be sent to a remote display location via a compatible receiver whilst USB2.0 device data can be fed back via the USB host or USB-C ports to a connected source. The SW-740-TX has 4 switchable source inputs: 2 HDMIs supporting 18Gbps video up to 2160p 8-bit RGB/4:4:4 thanks to DSC compression, VGA, and USB-C supporting not only 4K/30 video, but device data from the connected receiver and device charging; the stereo audio input can be assigned to the VGA source or sent separately to the receiver.

Specifications
AUDIO & VIDEO
Inputs:
1x VGA In: 15-pin VGA
1x USB-C
2x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo

Outputs:
1x HDMI Out: 19-pin type A
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x HDBT Out: 8-pin RJ-45 Female

Video Encoding: HDBaseT™ Class C

Encoding Data Rate: 9.2Gbps

End to End Latency: 10μs (micro seconds)

Audio Formats: 2ch and multichannel LPCM

Video Resolution (Max):
1920x1080p @60Hz 8bit
1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:4:4

Supported Standards: DCI | RGB

Maximum Pixel Clock: 600MHz

COMMUNICATION & CONTROL
HDMI: HDMI | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT: HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB | Serial

RS-232: 1x 4-pin Phoenix (Control)

Ethernet: 1x 8-pin RJ-45 female | Bidirectional over HDBaseT™

IR: 1x 4-pin Phoenix (Pass-through)

USB:
1x USB-C: USB 3.1
1x USB Host: USB-B
Data Rate: 190Mbps

CEC: Auto, Manual Display Power through HDMI & HDBT Output

Other:
PIR Sensor: 1x 4-pin Phoenix
Contact Input: 1x 5-pin Phoenix
Tally Output: 1x 5-pin Phoenix

POWER
Power Supply: 24V DC 6.66A

Max Power Consumption: Standard: 45W | With USB Charging: 110W

USB-C: Max. 20V charging (65W)