4K60 4×4 HDBaseT™ Matrix with Receivers – MXV-0404-H2A-KIT

Offering transmission of 18Gbps HDMI content up to 35m/115ft by pairing HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0404-H2A-KIT brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses a lossless compression technology to ensure signal integrity.

With 4 HDBaseT zone outputs and a mirrored HDMI output offering CEC triggering for all 5 connected screens, this kit enhances the offering for the modern home or commercial installation. Internal audio switching allows audio breakout from source or zone output via S/PDIF and analog stereo ports. Being a second generation product, now two of the included receivers are upgraded to scaling receivers, RXV-35-SCL, allowing compatibility between 1080p screens and 4K sources and additional 2ch/5.1 audio breakouts.

Specifications
AUDIO & VIDEO
Inputs: 4x HDMI In: 19-pin type A

Outputs:
4x Audio Out: RCA Female Stereo (L/R)
4x S/PDIF Out: RCA Female
4x HDBT Out: 8-pin RJ-45 Female

Video Encoding: HDBaseT™ Class B

Encoding Data Rate: 9.2Gbps

End to End Latency: 10µs (micro seconds)

Audio Formats:
Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max):
1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL
HDMI: HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT: HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR

CEC: CEC power triggering for connected screens – Requires CEC compatibility

IR:
1x IR Ext: 3.5mm (1/8in) TRS Stereo
4x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono – Bidirectional over HDBaseT

RS-232: 1x RS-232: 9-pin DB9 Female

Ethernet: 1x LAN: 8-pin RJ-45 Female

POWER
Power Supply: 100~240V AC 50/60Hz

PoH: 1-way Matrix to Receiver

Max Power Consumption: 85W with 4 RXs Connected via PoH