4K60 In-Line HDMI Scaler with Audio Breakout – CON-H2-SCL

An essential tool when mixing 4K & 2K screens on the same distribution system, the CON-H2-SCL enables in-line scaling of HDMI content. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of WyreStorm Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.

Specifications
AUDIO & VIDEO
Inputs: 1x HDMI In: 19-pin HDMI Type A

Outputs:
1x HDMI Out: 19-pin HDMI Type A
1x S/PDIF Out: TOSLINK (Digital Optical)

Audio Formats:
HDMI Pass-through: 2ch PCM
S/PDIF Out: De-Embed: 2ch PCM

Video Resolution (Max):
1920x1080p @60Hz 12bit
3840x2160p @60Hz 12bit 4:2:2 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

Maximum Pixel Clock: 600MHz

COMMUNICATION & CONTROL
HDMI:
HDMI 2.0 | HDCP 2.2 | EDID
Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)

RS-232: 1x RS-232: 3-pin Terminal Block – 3.5mm

USB: 1x USB: USB-A | Firmware Updates Only

POWER
Power Supply: 12V DC 2A

Max Power Consumption: 8.38W