EDS-MD

Wired IoT gateway for mission critical medical devices and equipment connectivity.

Specifications
Hardware:
600MHz ARM 11 processor
8 MB Flash
4 GB SD Card (internal only)
256 MB DRAM
Real Time Clock with Battery back-up
Onboard Thermal Sensor

Physical Interface
4/8/16 RJ45 (DTE) Serial Connectors
RS-232 Interface
Data rates – up to 921 Kbps
ESD Protection – 15kV
Circuit and port isolation – 1.5KVAC

2 USB Host ports – USB-A receptacle connectors
Output Capability = 0.5A
Circuit and port isolation – 1.5KVAC

3 Ethernet port – RJ45 connector ^
10/100/1000Mbps
Autosensing MDI/MDIX
Full/half duplex
Circuit and port isolation – 1.5KVAC

1 Reset Button

LED Indicators:
Power/System
Serial Ports (4, 8, 16)
Ethernet – Activity/Link

Physical Dimensions
Size: (L x W x H) 21 cm (8.25 in) x 19 cm (7.5 in) x 6 cm (2.4 in)

Weight:
16-Port = 0.9 Kg (2.0) lbs
8-port = 0.82 Kg (1.8 lbs)
4-port = 0.8 Kg (1.75 lbs)

Environmental:
Operating Temp: 0°C to +50° C (32°F to 122°F)
Storage Temp: -30°C to +80° C
Relative Humidity (Operating): 20% to 90% non-condensing
IP Rating = 20

Power:
Input: IEC60320 C14 receptacle without a power switch
100-240 VAC, 50/60 HZ, 0.4A
Power Consumption: 23 Watts Max
Nominal Power: 12 Watts

Mounting: Wall mount / Desktop