EDS1100 / EDS2100

Hybrid Ethernet terminal/multiport device servers for remote access to and management of virtually any IT/networking equipment or edge device.

Specifications
High performance 32-bit processor

On-board memory: 8MB SDRAM/8MB Flash

Serial Interface:
Modes: Software selectable RS232, RS422 or RS485 (2- and 4-wire configurations supported)
Software selectable RS485/422 termination and biasing
Standard and customizable serial data rates from 300 to 921kbps
Characters: 7 or 8 data bits
Parity: Odd, even, none
Stop Bits: 1 or 2
Modem Control Signals: CTS, RTS, DTR/DCD
Flow Control: XON/XOFF (software), CTS/RTS (hardware)

Serial Connectors:
EDS1100 (Single-port): 1 x DM25F (DCE)
EDS2100 (Dual-port): 2 x DB9M (DTE)

Network Interface:
10BaseT and 100Base-TX Link
Protocols: HTTP, HTTPS, FTP, TFTP, Telnet, TCP/IP, UDP/IP, LPD,DHCP, SSHv2, SSLv3, SNMP v2, Auto IP, RSS, ARP, ICMP, SYSLOG, AES, SMTP, DNS, BOOTP, PPP, RFC2217

Environmental:
Extended Temp: -40° to 85° C (-40° to 185° F)
Storage: -40° to 85° C (-40° to 185° F)
Relative Humidity: 5 to 95%, non-condensing
IP Rating: 30

Dimensions:
EDS1100:
Length: 9.0 cm (3.5 in)
Width: 6.4 cm (2.5 in)
Height: 2.3 cm (0.9 in)
Weight: 0.20 kg (0.45 lb)

EDS2100:
Length: 9.5 cm (3.7 in)
Width: 7.2 cm (2.8 in)
Height: 2.3 cm (0.9 in)
Weight: 0.4 kg (0.9 lb)