IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-span) – POE-163-EU

The POE-163 is a wall-mountable, single-port Gigabit 802.3at PoE+ injector with internal power supply in compact housing. Carrying both Ethernet data and power simultaneously, the POE-163 helps users to utilize just one Ethernet cable to easily install and deploy IP camera, wireless AP or VoIP phone networking in environments where power outlet is hard to find.

Specifications
Interface:
"Data" Input Port: 1 x RJ45 STP
"PoE (Data + Power)" Output Port: 1 x RJ45 STP
AC Input Power Socket: 1

LED Indicator:
System: Power x 1 (Green)
PoE Port: Active, PoE ready-in-use x 1 (Green)

Network Cable:
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100M (328ft)
100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100M (328ft)
1000BASE-T: 2-pair UTP Cat. 5, 5e, 6 up to 100M (328ft)
EIA/TIA-568 100-ohm STP (100m)

Data Rate: 10/100/1000Mbps

Dimensions (W x D x H): 115 x 62.5 x 31 mm

Weight: 185g

Unit Output Voltage: DC 50-54V, 0.6A

Power Requirements: 100-240V AC, 50/60Hz, 0.75A

Power Consumption: 30 watts max.

Number of Devices that can be powered: 1

Operating Temperature: 0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity: 5 ~ 95%, relative humidity, non-condensing
Storage Humidity: 5 ~ 95%, relative humidity, non-condensing

PoE Standard: IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Output: DC 50-54V/30 watts

PoE Power Supply Type: Mid-span

Power Pin Assignment: 4/5(+), 7/8(-)