Industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender – IPOE-E174

PLANET IPOE-E174 is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ input port and supplies a maximum of 75-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m where up to 4 powered devices (PDs) can be powered at the same time. The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

Specifications
Network Connector:
PoE In Port
　- 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in
　- Auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE Out Port
　- 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out
　- Auto MDI/MDI-X, auto-negotiation RJ45 connector

Switch Architecture: Store-and-Forward switch architecture

MAC Address Table: 2K MAC address table with auto learning function

Switch Fabric: 10Gbps

Switch Throughput: 7.44Mpps @ 64Bytes

Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

Jumbo Frame: 9Kbytes

ESD Protection:
Air 8KV DC
Contact 6KV DC

Surge Protection: 6KV

Enclosure: IP30 metal case

Installation: DIN-rail kit and wall-mount ear

Dimensions (W x D x H): 32 x 87.8 x 135 mm

Weight: 430g

Power Consumption:
5.6 watts/19.11 BTU (Power On)
6.5 watts/22.18 BTU (Full loading without PoE function)
82.3 watts/280.82 BTU (Full loading with PoE function)

PoE Standard:
PoE in Port
　- IEEE 802.3bt PoE++ Type 4 standard PD
　- PoH (Power over HDBASE-T)
　- IEEE 802.3at PoE+ end-span/mid-span PD
Per PoE out Port
　- IEEE 802.3at Power over Ethernet Plus end-span PSE

PoE Power:
PoE in Port
　- 50~57V DC, max. 95 watts
Per PoE out Port
　- 44~55V DC, max. 30.8 watts

Power Pin Assignment:
PoE in Port
　- 1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-)
Per PoE out Port
　- 1/2(+), 3/6(-)

PoE Power Budget:
75 watts (max.) @ 802.3bt PoE++ Type 4 input
60 watts (max.) @ 802.3bt PoE++ Type 3 input
75 watts (max.) @ PoH input
25 watts (max.) @ 802.3at PoE+ input

Operating:
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage:
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)