Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C) – WGS-4215-8P2S

Designed to be installed in a wall enclosure or simply mounted on a wall in any convenient location, PLANET WGS-4215-8P2S, an innovative Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-4215-8P2S is able to operate reliably, stably and quietly in any environment without affecting its performance. With a total power budget of up to 200 watts for different kinds of PoE applications and featuring ultra networking speed and operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the demand for the following network applications:

• Building/Home automation network
• Internet of things (IoT)
• IP surveillance
• Wireless LAN

Specifications
Copper Ports: Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

PoE Inject Port: Eight with 802.3at PoE+ injector function (Ports1 to 8)

SFP/mini-GBIC Slots: Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode

Reset Button:
< 5 sec: System reboot > 5 sec: Factory default

LED:
Power LED:
　Power (Green)
PoE Port (Port-1 to Port-8):
　PoE-in-Use (Orange)
　LNK/ACT (Green)
100/1000X SFP Ports (Port 9 to Port 10):
　1000 LNK/ACT (Green)
　100 LNK/ACT (Orange)

Connector:
Removable 3-pin terminal block for power input
　Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
　Pin 3 for earth ground
DC power jack with 2.0mm central pole

Power Requirements*:
48~56V DC, 5A (max.) terminal block power input
48~56V DC, 5A (max.) DC jack power input

Power Consumption/ Dissipation: Max. 210 watts/716 BTU

Dimensions (W x D x H): 178 x 25 x 134 mm

Weight: 640g

ESD Protection:
Contact Discharge 6KV DC
Air Discharge 8KV DC

Enclosure: IP30 metal

Installation: Fixed wall mount, magnetic wall mount or DIN rail

Switch Architecture: Store-and-Forward

Switch Fabric: 20Gbps/non-blocking

Switch Throughput@64 bytes: 14.8Mpps @64 bytes

MAC Address Table: 8K entries

Shared Data Buffer: 4.1 megabits

Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

Jumbo Frame: 10KB

Operating:
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage:
Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

*Remark: The two power input interfaces don’t support power redundant function.