Industrial IEEE 802.3at Gigabit Power over Ethernet Plus Injector (Mid-span) – IPOE-162

Planet IPOE-162 Single-Port, Mid-span Industrial IEEE 802.3at Power over Ethernet Plus Injector provides a maximum of up to 30 watts of power output over Ethernet cables. It is specifically designed to fulfill the growing demand of higher power network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen voice over IP (VoIP) telephones, multi-channel (11a/b/g/n) wireless LAN access points and other network devices that need higher power to work stably.

Specifications
Hardware Version: 3

Interface:
Input Port: 1 x RJ45 STP (Data In)
Output Port: 1 x RJ45 STP (Data + Power Out)
Input Power Terminal Block: 1

LED Indicator:
System:
　Power 1 (Green)
　Power 2 (Green)
　Fault (Red)
PoE Port:
　PoE-in-use x 1 (Orange)

Network Cable:
10BASE-T: UTP Cat. 3, 4, 5, up to 100m (328ft)
100BASE-TX: UTP Cat. 3, 4, 5, up to 100m (328ft)
1000BASE-T: UTP Cat. 5, 5e, 6 up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)

Data Rate: 10/100/1000Mbps

Dimensions (W x D x H): 32 x 87 x 135 mm

Weight: 489g

Unit Input Voltage: 12 ~ 48V DC

Power Consumption: 32 watts max.

Number of devices can be powered: 1

Installation: DIN-rail kit and wall-mount ear

Alarm: Provides one relay output for power failure; alarm relay current carry ability: 3A @ DC 24V

Enclosure: IP30 slim metal case

PoE Standard: IEEE 802.3at Power over Ethernet Plus / mid-span PSE

PoE Power Output: 30 watts

PoE Power Supply Type: Mid-span

Power Pin Assignment: 4/5(+), 7/8(-)

Operating Temperature: -40 ~ 75 degrees C
Storage Temperature: -40 ~ 85 degrees C
Humidity: 5 ~ 95% (non-condensing)