Industrial L2+ 4-Port 10/100/1000T 802.3bt PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch – IGS-5225-4UP1T2S

Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, the latest version of PLANET IGS-5225-4UP1T2S L2+ Industrial Managed PoE++ Switch features four 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts, one extra 10/100/1000BASE-T copper port and two 100/1000BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments. It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.

Specifications
Hardware Version: 4

Copper Ports: 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP/mini-GBIC Slots:
2 1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7)
Compatible with 100BASE-FX SFP

PoE Injector Port: 4 ports with 802.3bt PoE++/802.3at PoE injector function with Port-1 to Port-4

Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)

Switch Architecture: Store-and-Forward

Switch Fabric: 14Gbps/non-blocking

Throughput (packet per second): 10.42Mpps@ 64 bytes packet

Address Table: 8K entries, automatic source address learning and aging

Shared Data Buffer: 4Mbits

Flow Control:
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex

Jumbo Frame: 9Kbytes

Reset Button:
< 5 sec: System reboot > 5 sec: Factory default

ESD Protection: 6KV DC

Enclosure: IP30 aluminum case

Installation: DIN-rail or wall mounting

Connector:
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND

Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC

2 Digital Input (DI):
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input load to 24V DC, 10mA max.

2 Digital Output (DO): Open collector to 24V DC, 100mA max.

vLED Indicator:
System:
　Power 1 (Green)
　Power 2 (Green)
　Fault Alarm (Red)
　Ring (Green)
　Ring Owner (Green)
　DIDO (Red)
Per 10/100/1000T RJ45 Ports:
　100 LNK/ACT (Amber)
　1000 LNK/ACT (Green)
Per SFP Interface:
　100 LNK/ACT (Amber)
　1000 LNK/ACT (Green)
Per PoE Port:
　802.3bt PoE++-in-use x 1 (Green)
　802.3at/af PoE-in-use x 1 (Amber)
PoE Usage:
　60W, 120W, 180W, 240W (Amber)

Dimensions (W x D x H): 76.8 x 107.3 x 152 mm

Weight: 1050g

Power Requirements: Dual 48~56V DC (>52V DC for PoE+ output recommended)

Power Consumption:
Max. 6.6 watts/22.52BTU (Power on without any connection)
Max. 282 watts/962.22BTU (Full loading with 802.3bt PoE++ function)

Operating Temperature: -40 ~ 75 degrees C
Storage Temperature: -40 ~ 85 degrees C
Humidity: 5 ~ 95% (non-condensing)