Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1G SFP + 2-Port 1G/2.5G SFP Managed Ethernet Switch – IGS-5225-8P4S

PLANET IGS-5225-8P4S PoE L2+Industrial Managed PoE+ Switch, featuring 8 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and two 100/1G BASE-X SFP ports and two 100/1000/ 2500 BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.

Specifications
Copper Ports: 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

SFP Fiber Ports:
2 100/1000BASE-X SFP interfaces (Port 9 and Port 10)
2 100/1000/2500BASE-X SFP interfaces (Port 11 and Port 12)

PoE Injector Ports: 8 ports with 802.3at/af PoE injector function (Ports 1 to 8)

Console: 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)

RAM: 128Mbytes

Flash Memory: 64Mbytes

Reset Button:
< 5 sec: System reboot > 5 sec: Factory default

ESD Protection: 6KV DC

Enclosure: IP30 aluminum case

Installation: DIN-rail kit and wall-mount kit

Connector:
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND

Alarm: One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC

Digital Input:
2 digital input (DI)
　Level 0: -24V~2.1V (±0.1V)
　Level 1: 2.1V~24V (±0.1V)
　Input load to 24V DC, 10mA max.

Digital Output:
2 digital output(DO)
　Open collector to 24VDC, 100mA max.

Dimensions (W x D x H): 76.8 x 107.3 x 152 mm

Weight: 1104g

Power Requirements: Dual 48~56V DC (>51V DC for PoE+ output recommended)

Power Consumption:
Max. 6.48 watts/22.11BTU (Power on without any connection)
Max. 262 watts/893.42BTU (Full loading with PoE function)

LED Indicator:
System:
　Power 1 (Green)
　Power 2 (Green)
　Fault Alarm (Red)
　Ring (Green)
　DIDO (Red)
Per 10/100/1000T RJ45 PoE+ Ports:
　PoE-in-Use (Amber)
　LNK/ACT (Green)
Per 10/100/1000T RJ45Ports:
　1000 LNK/ACT (Green)
　100 LNK/ACT (Amber)
Per SFP Interface:
　10/100 LNK/ACT (Amber)
　1G/2.5G LNK/ACT (Green)

Switch Architecture: Store-and-Forward

Switch Fabric: 30Gbps/non-blocking

Throughput (packet per second): 22.32Mpps@ 64 bytes packet

Address Table: 8K entries, automatic source address learning and aging

Shared Data Buffer: 4Mbits

Flow Control:
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex

Jumbo Frame: 9Kbytes

Operating Temperature: -40 ~ 75 degrees C
Storage Temperature: -40 ~ 85 degrees C
Humidity: 5 ~ 95% (non-condensing)