NetworkHD™ 400 Series 4K AV over IP JPEG 2000 Encoder – NHD-400-TX
NetworkHD™ 400 Series 4K AV over IP JPEG 2000 Encoder
As part of the WyreStorm NetworkHD 400 Series, the NHD-400-TX streaming encoder offers stunning 4K HDR video, multi-channel audio support and 4K/2K auto-scaling to seamlessly handle mixed resolution sources, content and display devices for matrix and video wall functionality when used in conjunction with a 400 Series decoder.
Featuring incredibly low latency, the 400 Series is the ideal AV over IP solution for systems where high quality and low latency are key requirements, making it perfect for both residential and commercial applications.
Specifications
AUDIO AND VIDEO
Inputs: 1x HDMI
Outputs:
1x HDMI (Loop Out)
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x 8-pin RJ-45 (Transmission to RX)
Audio Formats: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Output Video Encoding: JPEG 2000
Encoding Data Rate: Max: 850Mbps
End to End Latency (Max): 1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps
Video Resolutions (Max):
1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0
Supported Standards: HDR10 | HLG | BT.2020 | BT.709 | 3D Video
Maximum Pixel Clock: 300MHz
COMMUNICATION AND CONTROL
HDMI: HDCP 2.2 | CEC
Ethernet: 1x 1GbE 8-pin RJ-45
USB: 1x USB Host: USB Type B | Power: 5v 500ma per port | Data Rate: Max 9MB/s
IR: 1x IR TX: 3.5mm (1/8in) TS Mono Jack | 1x IR RX: 3.5mm (1/8in) TRS Stereo Jack | Bidirectional Over Ethernet
RS-232: 1x RS-232: 4-pin Phoenix | 2 Way (RX only)
POWER
Power Supply: 12V DC 1A
PoE: IEEE 802.3af (15.4W at PSE)
Max Power Consumption: 8W (with PSU)