NetworkHD 610 Series 4K60 10GbE SDVoE Encoder & Decoder' – NHD-610

The NetworkHD 610 TX and RX expand the functionality of the powerful SDVoE 600 series product line. The 610s retain many of the capabilities found on the other models, such as full HDMI 2.0 encoding, zero latency transmissions, video wall and multiview processing. However, the 610s pack an extra punch by incorporating a Dante/AES67 output on the NHD-610-TX, allowing audio from the HDMI or analog audio input to transmit to Dante/AES67 enabled amplifiers, DSP or mixers. Both the TX and RX are also equipped with a full speed USB 2.0 chipset maximizing compatibility with thousands of USB peripherals for extension over the network, such as a keyboard/mouse, webcams, touchscreens, or just simple data transfers.

Specifications
AUDIO & VIDEO
Inputs:
TX:
1x HDMI 2.0
1x 5-pin Balanced Analog Audio
RX:
1x HDMI 2.0 (Switchable)
1x 5-pin Balanced Analog Audio
1x 10GbE 8-Pin RJ45

Outputs:
TX:
1x HDMI 2.0 Loop Out
1x 5-pin Balanced Analog Audio Out
1x 10GbE 8-Pin RJ45
RX:
1x HDMI 2.0 Output
1x 5-pin Balanced Analog Audio Out

Maximum Pixel Clock: 600MHz

Output Video Encoding:
SDVoE Pixel Pipeline | Dante / AES67 proprietary protocols

Encoding Data Rate:
1080p@60Hz 8bit – 3.4Gbps
4K UHD@30Hz 4:4:4 8bit – 6.4Gbps
4K UHD@60Hz 4:4:4 8bit – 8.7Gbps (with light compression)

Max End to End Latency:
Genlock Mode: Uncompressed = 30us, Compressed <120us Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps Video Resolution (Max): 4096x2160p @ 60Hz 8bit 4:4:4 or RGB 3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision 3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG 1920x1080p @ 60Hz 12bit Supported Standards: RGB | DCI | USB COMMUNICATION & CONTROL HDMI: HDMI 2.0b | HDCP 2.2 | CEC | EDID LAN: 1x 1GbE 8-pin RJ45 (Auxiliary Lan) RS-232: 1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable IR: 1x IR TX 3.5mm TS Mono Jack | API Programmable 1x IR RX 3.5mm TRS Stereo Jack | API Programmable USB: TX: 3x USB 2.0 Type A 1x USB 2.0 Type B Host USB Bandwidth: 480Mbps RX: 3x USB 2.0 Type A 1x USB 2.0 Type B Host USB Bandwidth: 480Mbps POWER Power Supply: 12V 2A DC PSU | 802.3at PoE+ Compliant Power Consumption: Max: 24w | Average: 10w