NM2-GXE-201 Series

Lantronix M.2 Gigabit Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 3060/5060/7060/7070 and 7080/7090 Micro PCs. The NM2-GXE-2230-xx-201 Series consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “A or E keyed” interface, a fiber optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fiber adapter. The fiber optic adapter is available with either a 1000Base-SX LC connector or an open SFP (SFP module sold separately). Please note the variation in versions within Ordering Information.

Specifications
Bus Slot: M.2 – ‘2230-D4-A-E’

Data Rate: 1000 Mbps (full duplex only)

Max Frame Size: 9014 bytes

Status LEDs:
LINK/ACT
ON = Link
Flashing = Activity

Dimensions:
M.2 NIC
2230-D4-A-E
Width: 0.87” [22 mm]
Depth: 1.18” [30 mm]
Height: 0.12” [3.08 mm]

Fiber Interface
Width: 1.65” [42 mm]
Depth: 2.05” [52 mm]
Height: 0.51” [13 mm]

FFC Cable
NM2-GXE-2230-xx-201: Length 5.013” [127.33 mm]
NM2-GXE-2230-xx-201A: Length 4.911” [124.74 mm]

Software Support: Windows 10, 8, 8.1, and 7 (32/64 bit); Linux

Power Consumption:
LC: 250mA @ 3.3V (0.8 Watts typical)
SFP: 120mA @ 3.3V (0.4 Watts typical without SFP module)

Power Source: M.2 interface connector: 3.3V (Refer to table 41 of M.2 Specification)

Environment:
Operating: 0°C to +45°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 0.1 lbs. [0.05 kg]