S6010 Series

The ION S6010 is a stand-alone managed media converter that offers a solution for extending DS1 – T1/E1 or PRI connections over fiber optic cabling. It provides fiber extension though a twisted pair RJ-48 port and a fiber port. These DS1 – T1/E1 converters must be used in pairs, one on each end of the fiber link. Management of the stand-alone converter is supported, in-band, over the fiber, when the remote S6010 is linked to a C6010 card installed in a managed ION Chassis. These DS1 – T1/E1 converters are available with fixed fiber connectors or an open SFP slot, with support for various fiber types, distances, and wavelengths to provide maximum flexibility for any network topology. CWDM SFPs can also be used to further increase the bandwidth capacity of the fiber infrastructure.

Specifications
Connectors:
Copper Connectors RJ-48, BNC
Fiber Connectors SFP: LC connector Uses standard 100Base-X/OC-3 SFP
Fixed Optics: ST or SC connector

Data Rate: T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s

Status LEDs: Power, Signal Detect Copper, Signal Detect Fiber

Dimensions:
Width: 3.25” [82 mm]
Depth: 6.5” [165 mm]
Height: 1″ [25 mm]

Power Consumption: 2.6 Watts

Power Input: 100-240 VAC

Power Output: 12 VDC

Environment:
Operating: -10°C to 65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 2 lbs. [0.90 kg]

MTBF:
With Power Supply:
Greater than 41,660 hours (MIL-HDBD-217F)
Greater than 114,580 hours (Bellcore)
Without Power Supply:
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)