S6310-3340

The S6310-3340 is a stand-alone media converter that provides an interface between a twisted pair RJ-11 port and a fiber port, allowing users to connect central-office voice grade signals to distant Plain Old Telephone equipment (POTS) utilizing standard telephone signaling. Two units are required to implement an end to end system. The first unit connects to a telephone line or PBX and is configured to act as a telephone (FXO Mode) and has the ability to detect ringing voltages. The second unit is the reciprocal unit and is configured to have the ability to act as a Central Office and connects to a telephone device (FXS Mode).

Together, the modules allow legacy analog phone lines to be extended over fiber for both permanent installations as well as temporary job-site installations.

Specifications
Analog Port: Connector: RJ11

FXS Mode:
Impedance: 600 ohms
REN: 1.0
Ring Cadence: 25 Hz

FXO Mode:
Impedance: 600 ohms
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 16-65 Hz

Dip Switches:
SW1 Up = FXO Down = FXS
SW2 Up = Normal Down = FXS Reversed
SW3 Up = U-Law Down = A-Law
SW4 not used
SW5 – SW8 Country Code Select

Status LEDs:
Pwr: On = power is on
FL: On = fiber link is up
ACTC: On = Off-Hook, Blink = Ringing, Off = On-Hook

Dimensions:
Width: 3.25” [82 mm]
Depth: 6.5” [165 mm]
Height: 1.0” [25 mm]

Power Consumption: 2.0 Watts without the SFP

Power Supply:
External AC/DC provided; 12 VDC, 1.25A Output
Unregulated, UL Listed

Environment:
Operating: 0°C to 50°C
Storage: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 2 lb. [0.9 kg]