SBFTF1010-130

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds.
When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode.

Specifications
Connectors:
Type: 8-position, RJ-45 receptacle:
1: TX+5: NC (no connection)
2: TX-6: RX-
3: RX+7: NC (no connection)
4: NC (no connection)
8: NC (no connection)

Data Rate: 10/100 Mbps

Dip Switch:
SW1 (TP): Auto-Negotiation enable/disable
SW2 (TP): 10Mbps or 100 Mbps
SW3 (Fiber): Half or Full-duplex
SW4: Redundancy/Switch

System LEDs:
Power (PWR): Indicates the presence of POWER
Primary (PRI): Indicates a link is established on the Primary port
Backup (BKP): Indicates the link has moved over to the Backup port

Port LEDs:
Lower Right:
Green indicates 100 Mbps;
Orange indicates 10 Mbps;
Flashing indicates Activity
Lower Left:
Green indicates full-duplex; Off half-duplex

Dimensions:
Width: 3.25” [82.55 mm]
Depth: 4.8” [121.92 mm]
Height: 1″ [25 mm]

Power Consumption: 2.4 Watts

Power Input:
120 VAC @ 60 Hz. (Domestic)
100 – 240 VAC @ 50 Hz. (International)

Power Output:
12 VDC, 0.5 Amp (Domestic)
12 VDC, 1.25 Amp (International)

Environment:
Operating: 0°C to 50°C
Storage: -15°C to 65°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.

Weight: 2 lbs. [0.90 kg]