UDS2100

The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet.

Specifications
Serial Interface:
Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Connectors: 2 DB9M DTE serial ports
Data Rates: Software-selectable baud rate from 300 to 921 KBaud
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2 Control
Signals: CTS/RTS (Hardware)
Flow Control: XON/XOFF (Software)

Network Interface:
Interface: 10Base-T/100Base-TX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Connectors: RJ45
Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, and RFC2217

Indicators (LED):
Power (blue)
RXI Serial (Activity) (green)
TXI Serial (Activity) (yellow)
RX2 Serial (Activity) (green)
TX2 Serial (Activity) (yellow)
RJ45 LEDs Link (100=green,10=yellow)
Act (Full=green, Half duplex=green)

Power: 9-30 VDC on barrel connector (1.8 Watts maximum consumption)

Environmental:
Operating: 0° to 60° C (32° to 140°F)
Storage: -40° to 85° C (-40 to 185°F)

Dimensions (L x W x H): 9.5 x 7.2 x 2.3 cm (3.7 x 2.8 x 0.9 in)
Weight: 0.4 kg (0.9 lbs)
IP Rating: 30